BASIC ELECTRONICS LAB

Approx. Rs 2,500 / UnitGet Latest Price

SCOPE OF LEARNING:

VERIFICATION OF MAXIMUM POWER TRANSFER THEOREM

TECHNICAL SPECIFICATIONS:

Analog Meters:

• Ammeter 30mA DC.
• Voltmeter 12V DC.

Power Supplies:

• DC Supply IC Regulated 0-12V DC, 150mA.
  • Operated on Mains power 230V, 50Hz +10%

Components are mounted on the panels are:

• Resistances 2Watts
• Variable Resistor
• Voltage Control through Potentiometer.

SALIENTFEATURES:

• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
  • Fuse for Short Circuit protection
  • Instruction manual.
  • Connections are brought out through 4mm Colored Sockets.
  • Patch Cords 4mm.
  • The trainer is housed in ABS Plastic cabinet.
  • Size of the trainer set 12”x8”

Approx. Rs 4,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 3,200 / UnitGet Latest Price

Experiment: Characteristics of OPTO COUPLER

SPECIFICATIONS:

Analog Meters:

1. Ammeter 10mA DC.
2. Ammeter 10mA DC.
3. Voltmeter 10V DC.

Power supplies:

1. DC Supply IC Regulated 0-10V DC, 150mA.
2. DC Supply IC Regulated 0-10V DC, 150mA.

• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
• Fuse for Short Circuit protection

Components are mounted on the panels are:

• OPTO COUPLER MCT2E
• Voltage Control through Potentiometer.

Salient Features:

• Instruction manual.
• Operated on Mains power 230V, 50Hz.
• Patch Cords 4mm.
• Supply provided through the 3 pin computer socket with appropriate fuse
• The trainer is housed in ABS Plastic cabinet.
• Size of the trainer set 12”x8”

Approx. Rs 7,500 / UnitGet Latest Price

Approx. Rs 2,800 / PieceGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 2,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 3,500 / NumberGet Latest Price

Approx. Rs 3,500 / PieceGet Latest Price

Approx. Rs 3,500 / PieceGet Latest Price

Approx. Rs 2,800 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 2,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 2,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 2,500 / PieceGet Latest Price

• 8 or 10 Logic Input switches with LED Indication for logic low and logic high.
• 8 or LED for output indication with LED Driver.
• Logic Pulsar to provide single pole double throw bounce less pulses of
• Low to High and High to Low transitions.
• Solder less Breadboard with 840 tiepoints.
• Two seven-segment LED display with decoder driver and provision for BCD input.
• Interconnections (Input/output) Clock generator 1Hz to 100 KHz variable output.

Approx. Rs 2,200 / PieceGet Latest Price

Approx. Rs 5,500 / UnitGet Latest Price

Experiment: Characteristics of IGBT

SPECIFICATIONS:

Digital Meters:

1. Voltmeter 20V DC.
2. Ammeter 200mA DC.
3. Voltmeter 200V DC.

Power supplies:

1. DC Supply IC Regulated 0-5V DC, 150mA.
2. DC Supply IC Regulated 0-30V DC, 150mA.

• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
• Fuse for Short Circuit protection

Components are mounted on the panels are:

• IGBT 25N120
• Voltage Control through Potentiometer.
• Series Resitors

SalientFeatures:

• Instruction manual.
• Operated on Mains power 230V, 50Hz.
• Patch Cords 4mm.
• Supply provided through the 3 pin computer socket with appropriate fuse
• The trainer is housed in ABS Plastic cabinet.
• Size of the trainer set 12”x8

Approx. Rs 2,800 / UnitGet Latest Price

Experiment: Characteristics of Mosfet

SPECIFICATIONS:

Digital Meters:

1. Voltmeter 20V DC.
2. Ammeter 200mA DC.
3. Voltmeter 200V DC.

Power supplies:

1. DC Supply IC Regulated 0-5V DC, 150mA.
2. DC Supply IC Regulated 0-30V DC, 150mA.

• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
• Fuse for Short Circuit protection

Components are mounted on the panels are:

• Mosfet IRF540
• Voltage Control through Potentiometer.

SalientFeatures:

• Instruction manual.
• Operated on Mains power 230V, 50Hz.
• Patch Cords 4mm.
• Supply provided through the 3 pin computer socket with appropriate fuse
• The trainer is housed in ABS Plastic cabinet.
• Size of the trainer set 12”x8”

Approx. Rs 1,500 / UnitGet Latest Price

SCOPE OF LEARNING:

• Study and Construction of RC Phase Shift Oscillator
  • TECHNICAL SPECIFICATIONS:

Power Supplies:

• DC Power Supply IC Regulated +15V DC, 150mA.
  • Operated on Mains power 230V, 50Hz +10%

Components are mounted on the panels are:

• 741 Op-Amp
• Resistors
• Capacitors
• Variable Resistor

Output Performance Approximate

• SALIENT FEATURES:
• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
  • Fuse for Short Circuit protection
  • Instruction manual.
  • Connections are brought out through 4mm Colored Sockets.
  • Patch Cords 4mm.
  • The trainer is housed in ABS Plastic cabinet.
  • Size of the trainer set 10”x8”

Approx. Rs 2,800 / UnitGet Latest Price

Experiment: Characteristics of UJT

SPECIFICATIONS:

Digital Meters:

1. Volt meter 20V DC.
2. Ammeter 200mA DC.
3. Voltmeter 200V DC.

Power supplies:

1. DC Supply IC Regulated 0-15V DC, 150mA.
2. DC Supply IC Regulated 0-30V DC, 150mA.

• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
• Fuse for Short Circuit protection

Components are mounted on the panels are:

• UJT 2N2646
• Voltage Control through Potentiometer.

SalientFeatures:

• Instruction manual.
• Operated on Mains power 230V, 50Hz.
• Patch Cords 4mm.
• Supply provided through the 3 pin computer socket with appropriate fuse
• The trainer is housed in ABS Plastic cabinet.
• Size of the trainer set 12”x8”

Approx. Rs 10,500 / UnitGet Latest Price

SCOPE OF LEARNING:

Study of Angular Displacement Using Capacitive Transducer

TECHNICAL SPECIFICATIONS:

Digital Meters:

• Voltmeter 200mV DC.

Power Supplies:

• DC Supply IC Regulated +12V, +5V DC, 150mA.
  • Operated on Mains power 230V, 50Hz +10%

Components are mounted on the panels are:

• Variable Gang Capacitor as Transducer.
• Variable Resistor
• 741 IC
• Inbuilt Function Generator.
• Inbuilt F to V Converter

SALIENT FEATURES:

Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.

• Fuse for Short Circuit protection
• Instruction manual.
• Connections are brought out through 2mm Colored Sockets.
• Patch Cords 2mm.
• The trainer is housed in ABS Plastic cabinet.
• Size of the trainer set 12”x8”

Approx. Rs 2,800 / UnitGet Latest Price

Experiment: Characteristics of Triac

SPECIFICATIONS:

Digital Meters:

1. Ammeter 2000uA DC.
2. Ammeter 200mA DC.
3. Voltmeter 20V/200V DC.

Power supplies:

1. DC Supply IC Regulated 0-5V DC, 150mA.
2. DC Supply IC Regulated 0-30V DC, 150mA.

• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
• Fuse for Short Circuit protection

Components are mounted on the panels are:

• Triac BT136
• Voltage Control Through Potentiometer.

SalientFeatures:

• Instruction manual.
• Operated on Mains power 230V, 50Hz.
• Patch Cords 4mm.
• Supply provided through the 3 pin computer socket with appropriate fuse
• The trainer is housed in ABS Plastic cabinet.
• Size of the trainer set 12”x8”

Approx. Rs 4,500 / PieceGet Latest Price

Specification:

Trainer  comprises of Power supplies inside the trainer

·         Power supplies on boards 0-12V, 250 mA and 0-5V,250mA Variable

·         +12V/150mA and +5V/150mA Fixed Supplies provided on board.

·         3 Nos of Variable resistor provided on the board.

·         Ac power supply 15-0-15V for rectifier applications

Various components on the trainer set

·         3 Pairs of connected 2mm sockets

·         4 Rectifier diodes

·         1 OA79 germanium diode

·         3 different values of Zener

·         N different values resistances

·         N  different values capacitors

·         Inductors 1mh, 10mh

·         1 DIAC DB33

·         1 SCR TYN604

·         1 TRIAC BT136

·         1 MOSFET IRF540

·         1 UJT 2N2646

·         1 JFET NF245

·         SL100 and SK100 pair

·         BC547 1nos.

·         1 LDR

·         1 Thermistor

·         2 LED’s     

Features

·         Trainer operated on 230V, 50 Hz + 10%

·         Supplied with instruction manual

·         Supplied with sufficient nos. of patch cords

·         Supplied with Computer Lead

Approx. Rs 2,400 / PieceGet Latest Price

Approx. Rs 1,950 / PieceGet Latest Price

Approx. Rs 1,900 / PieceGet Latest Price

Approx. Rs 2,500 / PieceGet Latest Price

Approx. Rs 2,500 / UnitGet Latest Price

Following Experiment can be easily performed on the trainer. Use external multimeter to read current and voltages.

Specification:

Trainer  comprises of Power supplies inside the trainer

·         Power supplies on boards 0-12V, 250 mA and 0-5V,250mA Variable

·         +12V/150mA and +5V/150mA Fixed Supplies provided on board.

·         3 Nos of Variable resistor provided on the board.

·         Ac power supply 15-0-15V for rectifier applications

Various components on the trainer set

·         3 Pairs of connected 2mm sockets

·         4 Rectifier diodes

·         1 OA79 germanium diode

·         3 different values of Zener

·         N different values resistances

·         N  different values capacitors

·         Inductors 1mh, 10mh

·         1 DIAC DB33

·         1 SCR TYN604

·         1 TRIAC BT136

·         1 MOSFET IRF540

·         1 UJT 2N2646

·         1 JFET NF245

·         SL100 and SK100 pair

·         BC547 1nos.

·         1 LDR

·         1 Thermistor

·         2 LED’s     

Features

·         Trainer operated on 230V, 50 Hz + 10%

·         Supplied with instruction manual

·         Supplied with sufficient nos. of patch cords

·         Supplied with Computer Lead

·         Dimensions of  the Trainer will be 12’’x10’’ with Plastic Box Highly shock proof .

Approx. Rs 2,500 / UnitGet Latest Price

SCOPE OF LEARNING:

• To study the IC 555 as a Monostable ( One-shot) Mutivibrator
• To Study the IC 555 as an Astable ( Free-Running) Mutivibrator
• To Study the IC 555 as an Bistable Mutivibrator
  • TECHNICAL SPECIFICATIONS:

Power Supplies:

• DC Power Supply IC Regulated +15V DC, 150mA.
  • Operated on Mains power 230V, 50Hz +10%

Components are mounted on the panels are:

• Passive Components are mounted on board behind the panels are
  • RESISTANCE
  • CAPACITORS
  • IC NE555
  • VARIABLE RESISTOR 10K
  • PULSAR SWITCH

Output Performance Approximate

• Frequency range of Astable Mulltivibrator : 600 Hz to 3.2 KHz
• Frequency range of Bistable Mulltivibrator : 350 Hz to 1 KHz
• SALIENTFEATURES:
• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
  • Fuse for Short Circuit protection
  • Instruction manual.
  • Connections are brought out through 2mm Colored Sockets.
  • Patch Cords 2mm.
  • The trainer is housed in ABS Plastic cabinet.
  • Size of the trainer set 10”x12”

Approx. Rs 3,500 / UnitGet Latest Price

Trainer  comprises of  

Power supplies inside the trainer

·         Power supplies on boards 0-12V, 250 mA and 0-5V,250mA Variable

·         +12V/150mA and +5V/150mA Fixed Supplies provided on board.

·          On board bread board provided

·         Ac power supply 15-0-15V for rectifier applications

Various components on the trainer set

·         3 Pairs of connected 2mm sockets

·         4 Rectifier diodes

·         1 OA79 germanium diode

·         3 different values of Zener

·         N different values resistances

·         N  different values capacitors

·         Inductors 1mh, 10mh

·         1 DIAC DB33

·         1 SCR TYN604

·         1 TRIAC BT136

·         1 MOSFET IRF540

·         1 UJT 2N2646

·         1 JFET NF245

·         SL100 and SK100 pair

·         BC547 1nos.

·         1 LDR

·         1 Thermistor

• 2 LED’s          

Features

·         Trainer operated on 230V, 50 Hz + 10%

·         Supplied with instruction manual

·         Supplied with sufficient nos. of patch cords

·         Supplied with Computer Lead

Approx. Rs 4,500 / PieceGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 18,200 / PieceGet Latest Price

Approx. Rs 2,800 / UnitGet Latest Price

Experiment: Characteristics of SCR

SPECIFICATIONS:

Digital Meters:

1. Ammeter 20mA DC.
2. Ammeter 200mA DC.
3. Voltmeter 20V/200V DC.

Power supplies:

1. DC Supply IC Regulated 0-5V DC, 150mA.
2. DC Supply IC Regulated 0-30V DC, 150mA.

• Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols.
• Fuse for Short Circuit protection

Components are mounted on the panels are:

• SCR TYN604
• Voltage Control through Potentiometer.

SalientFeatures:

• Instruction manual.
• Operated on Mains power 230V, 50Hz.
• Patch Cords 4mm.
• Supply provided through the 3 pin computer socket with appropriate fuse
• The trainer is housed in ABS Plastic cabinet.
• Size of the trainer set 12”x8”

Approx. Rs 4,500 / UnitGet Latest Price

Trainer  comprises of  

Power supplies inside the trainer

·         Power supplies on boards 0-12V, 250 mA and 0-5V,250mA Variable

·         +12V/150mA and +5V/150mA Fixed Supplies provided on board.

·          On board bread board provided

·         Ac power supply 15-0-15V for rectifier applications

Various components on the trainer set

·         3 Pairs of connected 2mm sockets

·         4 Rectifier diodes

·         1 OA79 germanium diode

·         3 different values of Zener

·         N different values resistances

·         N  different values capacitors

·         Inductors 1mh, 10mh

·         1 DIAC DB33

·         1 SCR TYN604

·         1 TRIAC BT136

·         1 MOSFET IRF540

·         1 UJT 2N2646

·         1 JFET NF245

·         SL100 and SK100 pair

·         BC547 1nos.

·         1 LDR

·         1 Thermistor

• 2 LED’s          

Features

·         Trainer operated on 230V, 50 Hz + 10%

·         Supplied with instruction manual

·         Supplied with sufficient nos. of patch cords

·         Supplied with Computer Lead

Approx. Rs 16,000 / PieceGet Latest Price

We are dedicatedly involved in providing an excellent quality array of CRO Trainer Kit, for catering the various needs of our clients.

Approx. Rs 4,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 3,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 2,500 / UnitGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement

Approx. Rs 16,500 / PieceGet Latest Price

Approx. Rs 3,200 / PieceGet Latest Price

• The trainer board should comprises of following blocks
• Sine/Square/TTL Generator
• Speaker
• Potentiometer
• Pulse Switch
• Logic Probe

Approx. Rs 3,500 / PieceGet Latest Price

·         Supplied with 3 additional regulated power supplies for applications.

·         All sockets are 2mm with sufficient nos. of patch cords.

Technical Specification:

The Instrument comprises of the Following built in Parts:-

·         Two Nos of 741 Op-Amp given on board.

·         One 555 IC Given on board.

·         Two continuously variable DC regulated power supplies of , 0-5V and 0-12V Dc,

·         Two Controls Switches mounted on the panel or a Digital panel voltmeter in place of switches.

·         One fixed voltage DC Regulated power supplies +15V is on Board for internal op-amp biasing.

·         One Variable Resistor (Potentiometer) having 10K value is mounted on the board.

·         N number of Resistances and Capacitors are on board for the required operations to be performed.

·         4 Diode 1N4007, 2 numbers of 1N4148, 2 LED and 2 numbers of Zener Diode having value of 3.3V and 5.1V are mounted on the board.

·         Operated on 230V, 50Hz power supply +10%

Packing list

·         Instruction manual

·         Patch cords

Approx. Rs 4,500 / PieceGet Latest Price

Additional Information:

• Delivery Time: requirement
• Packaging Details: requirement